R-C

This paper analyzes a kind of resistance-capacitance(RC) battery model in ADVISOR(Advanced Vehicle Simulator), and carries out data processing and validates RC model by using battery-model program in ADVISOR.

该文分析了ADVISOR软件中阻容型(RC)电池模型,并且利用ADVISOR软件中的电池模型程序对RC模型进行数据处理和模型验证。

The protection mode of combination of ZnO piezo-resistance and RC protection is adopted to solve the problem.

分析了白山发电厂发电机励磁功率整流装置尖峰过电压过高的问题,采用氧化锌压敏电阻和阻容保护相结合的保护方式,通过压敏电阻降低过电压的幅值,同时由阻容保护降低过电压的陡度,解决了尖峰过电压过高的问题。

Transient Voltage Sharing of Series Connected IGCTs Paralleld with RC-snubbers;

基于RC阻容吸收的串联IGCT动态均压研究

Investigation on the influence of working pressure on the performance of the thermoacoustically driven RC load;

工作压力对热声驱动阻容负载性能影响的实验研究

Experimental study on thermoacoustically driven RC load;

热声发动机驱动阻容负载的实验研究

A resistance-capacitance network is used to simulate characteristics of these two structures.

为改善电力设备中的电场分布,引入了两种含有非线性介质的复合应力控制结构,利用阻容网络模型对这两种结构进行了电路模拟,并用专门开发的时域有限元计算程序对前者进行了电场模拟,实验利用简化的电缆终端试样进行。